General Radiography


LISTEM Life Imaging Systems
Hydraulic 6-Way X-Ray Table      KOB-60

The KOB-60 Radiography Table has been designed to be easy to use and versatile in general purpose radiographic procedures. It features a 6-way (elevating and floating) movable top, designed to reduce patient positioning time and effort: it is particularly well suited for orthopaedic and hard-to-move patients.

The transverse, longitudinal and High-Low movement of the tabletop are controlled by foot switches at the front of the base. Tabletop height can be adjusted to match patient trolley height for ease of patient movement.

The hydraulic elevating / lowering movement is smooth, quiet and powerful.

The KOB-60 Radiographic Table was also designed to be safe. The interlock circuit helps the operator align the tabletop to the central position, which reduces the risk of damage when driving the table-top high and low. AEC ion chambers are available as an option.

The KOB-60 Radiographic Table is 213cm long and slides 37cm toward the head end and 37cm to foot end.

KOB-60 Features
6-way movable tabletop for easy and rapid patient positioning.
Smooth movement of the large floating tabletop.
Engineered to required minimum field installation.
Minimum object to film distance.
Radiolucent tabletop with slide rails for accessory attachment.
Hoffman type bucky and grid.

KOB-60 Specifications
Tabletop height Floor to table top min. 540mm, max 815mm
Vertical excursion 275mm.
Vertical drive system Hydraulic pump with oil reservoir, hydraulic cylinder, electric solenoid valves.
Tabletop dimensions 2130mm x 780mm.
Tabletop material Scratch resistant laminate, completely flat, 6mm thick, with engraved centre line.
Inherent filtration Less than 1.0mm AI equivalent at 100kVp.
Accessory rails Extruded anodised aluminium C-slot type.
Tabletop to film distance DB200 bucky (with slot for AEC) 85mm.
Longitudinal excursion 740mm (±370mm to either side).
Transverse excursion 300mm (±150mm left and right).
Lock system 3 electromagnetic locks (total 5 solenoids).
Bucky system DB200 Hoffman type, DC motor driven.
AEC detector slot For 10mm thick 18” x 18.5” ion chamber.
Bucky excursion 260mm (±130mm from centre line).
Grid JPI AL grid, 85 lines/inch, 8”1 ratio, 1m F.F.D.
Cassette tray Stainless steel universal type.
Film Format All from 18cm x 24cm up to 35cm x 43cm.
Weight Approx. 270kg.
Table power supply 240V-5A (hydraulic pump, locks, bucky).
Bucky start signal 100-120V AC to suit most generators (200-240V AC mod. kit available).
Power/interface cables 2m x 9m complete with plugs included.
Floor mounting Four 8mm holes for Dynabolts.

Floor to ceiling mounted Tube Stand SFC-31 (R)

The SFC-31 (R) is a fully balanced heavy duty tube stand with up to 55kg support capacity. All positions are maintained by electromagnetic locks operated with the control handle located at the front of the tube head. The telescopic transverse arm permits effective use of a small room and it can be installed in a low ceiling room.

Floor Mounted Tube stand SFM-31

The SFM-31 Floor to Mounting Tube stand is a sturdy, functional tube support designed for medium heavy-duty usage. This unit can be used with all general purpose diagnostic X-Ray tables and wall Bucky-stands.

The amplititude of the tube movement allows versatility for all procedures. The SFM-31 is versatile and compact and can be installed in any room configuration.

Distance scales are conveniently located in front of the vertical column assembly.

Ceiling Suspension CSTS-28

A counterbalanced ceiling suspension provides a heavy duty, quality suspension system. All the positions are maintained by clutch brakes operated with the control handle located at the front of the tube. Highest quality electromagnetic locks are installed. A sturdy construction gives maximum stability and is able to accommodate the heaviest combination of tube and collimator.

Large dual LED display provides F.F.D. readouts for tabletop and Bucky film distances. A full range of smooth vertical and horizontal movement is conveniently controlled by the operator. The automatic locking system can be set to predetermined locations of vertical, longitudinal and horizontal F.F.D. A safety warning lamp on the control handle indicates any failure.

Floating Top X-Ray Table KOB-1

  • Four-way moveable tabletop for easy and rapid patient positioning.
  • Smooth movement of the large floating tabletop.
  • An engineered unit requiring minimum field installation.
  • Rugged modular construction for continuous heavy usage.
  • Automatic transverse centering index.
  • Electric lock operated by photo sensor.
  • Minimum object to film distance.
  • Radiolucent tabletop with slide rails for accessory attachment.

Vertical Bucky BS-20
Vertical Bucky Tilting BS-20T

  • Heavy-duty vertical column, supports a variable height, counterbalanced bucky.
  • Electromagnetic locks for precise positioning and dependability to assure fast, accurate setup.
  • Cassette can be inserted from left or right side.
  • Smooth limitation of travel permits easy positioning and operating.
  • Wide range vertical travel of 115cm allows variety of techniques.
  • High quality exposures are ensured by the short distance from film to front plate.
  • Minimum space required and fast and easy adjustment.
  • Can be attached to wall without foot plate.

X-Ray Table ± Fixed Grid TS-10
X-Ray Table with Bucky TS-10B

  • TS.10 Cassette Tray.
  • TS.10B Hoffman Bucky.
  • Strong, versatile and compact designed for quick and easy installation.
  • Positive mechanical lock on cassette tray.
  • Wide range of cassette tray travel.
  • High-volume patient payloads.
  • Tabletop to film distance is 5.5cm for maximum geometric sharpness.
[Previous] [Index] [Top of Page] [Next]

copyright biolab 2005 | terms & conditions | privacy policy